Unable to connect to Wifi after update

Igor Moura

Hello guys

After updating my omega to 0.0.8 I can't connect to my wireless network anymore.

That's the output of wifisetup:

root@Omega-0AAD:/# wifisetup 
Onion Omega Wifi Setup

Select from the following:
1) Scan for Wifi networks
2) Type network info
q) Exit

Selection: 1
Scanning for wifi networks...
Command failed: Not found
Failed to parse message data
WARNING: Variable 'results' does not exist or is not an array/object
> ERROR: Scan failed, try again

> ERROR: specified ssid not in the database

Here is the output of uci show wireless | grep disabled

root@Omega-0AAD:/# uci show wireless | grep disabled
wireless.radio0.disabled='0'
wireless.@wifi-iface[0].disabled='1'

When I try to change the value from 1 to 0 and reboot, it goes back to 1.

Any ideas?

Chris McCaslin

This post is deleted!

Lazar Demin

@Igor-Moura for the time being, set wireless.@wifi-iface[0].disabled to 0 and run the command wifi, that should allow you to connect to your existing wifi network and give you access to the console.

I would then recommend setting up and enabling an AP network on the Omega.

Let me know how it goes!

Igor Moura

@Lazar-Demin worked fine, thanks