Wireless setup

Guest

This post is deleted!

Guest

@Nayan was curious so checked my other Omega with the most current firmware and here is what I got:

wpad - 2015-03-25-1 - This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS Authenticator and Supplicant
wpad-mesh - 2015-03-25-1 - This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
wpad-mini - 2015-03-25-1 - This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).

It appears you don't have to download and install as they are already present just not sure if they all are loading concurrently?

Guest

@Haoran-Li followed your tutorial but can not get this to function would you be so kind to review my steps and see if something I did was incorrect?

Guest

@Lazar-Demin @Haoran-Li Never got this to work have you had time to review my steps and help me out?

Guest

Can I get some help with this please.

Guest

@Lazar-Demin said:

@Guest In the post with all of the configuration files, can you please edit the post to format the settings with code syntax? It's incredibly hard to read with the current formatting.
There's a guide here: https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet#code

I'll ask @Haoran-Li to take a look, meanwhile you should experiment as well, we definitely welcome innovation in the community

Do you have an update for me on this procedure did I derail following the instructions? Have not heard from Haoran.

Lazar Demin

@Guest Hoaran's co-op term with Onion has ended. We're hoping to get him back in the fall for another co-op term

In the meantime, we've tried following the tutorial from the beginning with a factory restored Omega and it worked as expected. So we've confirmed the procedure is correct.

Please try a factory reset on your Omega and try the procedure from the tutorial again. We can provide tutorials and general advice, but we simply do not have the resources to debug cases on an individual basis.

Guest

Fair enough if you say it worked then will try it again.

Guest

@Lazar-Demin Could you post how you tested the configuration and the files associated with this setup so i could do some comparisons?

Guest

@administrators after following the tutorial step by step for the 5th or 6th time and connecting my laptop to the ethernet port on the omega it fails to acquire the DHCP setting from my router. Same laptop connected directly to the router works fine? Any input or posting of files which made your connection successful would be appreciated.

Lazar Demin

@Guest Is your laptop setup to obtain an IP Address automatically from the DNS as mentioned in Step 4?
Can you check with another device that has an Ethernet port? Even another Omega + Ethernet Expansion will work.

All of the files on the Omega that have been modified are mentioned in the tutorial.

Guest

@Lazar-Demin Yes it is setup to automatically collect ip address (assuming you mention DHCP server).
And yes can move my ethernet expansion to my other omega and update.

Lazar Demin

@Guest Ok try your other Omega as well, but I meant try connecting the Omega Ethernet Bridge to another laptop or computer, just to make sure that it's not your laptop that's the issue!

Guest

When I connect the laptop to the network with out using the omega it obtains IP address just fine and can access the web.

Lazar Demin

@Guest Yes I figured your laptop can connect to your network just fine without the Omega...

What I was saying is using your Omega Ethernet Bridge with another laptop or computer. So we can find out if the problem is your laptop or the Omega!

Guest

@Lazar-Demin First computer tested was my laptop running windows vista it fails.
Second computer tested was my laptop Macbook it failed.

I do see this on the omega terminal window:

[ 8393.870000] eth0: link up (100Mbps/Full duplex)
[ 8393.870000] br-lan: port 1(eth0) entered forwarding state
[ 8393.880000] br-lan: port 1(eth0) entered forwarding state
[ 8395.880000] br-lan: port 1(eth0) entered forwarding state

But no connection can be made.

Luciano S.

I remember to read in one of the Tutorials about using the Omega as router, you have to give access between the wireless and the network over the network adapter. But don't ask me in witch one!

Guest

@Luciano-S. Sorry Luciano but not sure what you are saying, so this my best guess.

The LAN and WLAN could be bridged on the omega in order for this to work and as per tutorial this is were he points out doing the following which I have incorporated into the configuration but still does not work.

CONFIGURE FIREWALL FILE
Step 3: Connect the Two Interfaces via Firewall Configuration
At this point you are asked to modify the /etc/config/firewall file as follows:
add;
line list network 'lan' to the firewall configuration file which I completed.

config zone
    option name     lan
    list   network      'wlan'
    list   network      'lan'    
    option input        ACCEPT
    option output       ACCEPT
    option forward      ACCEPT
	
	
REBOOT

Luciano S.

Yes something like this I had in mind. You could do a ifconfig on the omega and post here.

At least the lan IP from the Omega should be in the same range as your Home-lan. I could imagine if this is not the same, you will not reach the DHCP Server from your network.

On a windows computer you can see the IP with ipconfig /all in terminal (cmd).

@Guest if you really need this so much ... you probably should think to hire someone who does this config for you.

Guest

@Luciano-S.
After running ifconfig -a on the omega configured as per tutorial: Using the Omega as a WiFi Ethernet Bridge
Here is what I got.

root@Omega-xxxx:/# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0B
          inet addr:192.168.3.1  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::42a3:6bff:fec1:170b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:157 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20802 (20.3 KiB)  TX bytes:5884 (5.7 KiB)

eth0      Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0B
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:242 errors:0 dropped:12 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:38638 (37.7 KiB)  TX bytes:10088 (9.8 KiB)
          Interrupt:4

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3264 (3.1 KiB)  TX bytes:3264 (3.1 KiB)

wlan0     Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0C
          inet6 addr: fe80::42a3:6bff:fec1:170c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:4353 (4.2 KiB)

As for the IP from the Omega being in the same range as my home-lan that has occurred to me and thought as you did this was stopping the DHCP server from seeing the Omega. Tested this by changing the IP address in this section of the /etc/config/network file.

config interface 'lan'
   option ifname 'eth0'
   option type 'bridge'
   option proto 'static'
   option ipaddr '192.168.1.98'
   option netmask '255.255.255.0'
   option ip6assign '60'



The results from  running ifconfig -a:

root@Omega-170B:/# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0B
          inet addr:192.168.1.98  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::42a3:6bff:fec1:170b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:190 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:23763 (23.2 KiB)  TX bytes:6088 (5.9 KiB)

eth0      Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0B
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:306 errors:0 dropped:11 overruns:0 frame:0
          TX packets:65 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:45989 (44.9 KiB)  TX bytes:15250 (14.8 KiB)
          Interrupt:4

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:144 errors:0 dropped:0 overruns:0 frame:0
          TX packets:144 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9792 (9.5 KiB)  TX bytes:9792 (9.5 KiB)

wlan0     Link encap:Ethernet  HWaddr 40:A3:6B:C1:17:0C
          inet6 addr: fe80::42a3:6bff:fec1:170c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:4301 (4.2 KiB)

The output from the ipconfig /all file did not show DHCP assigned address indicating it is not seeing the LAN side of the Omega.

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller
   Physical Address. . . . . . . . . : 00-1D-72-FA-0A-B9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::15c5:7634:3aff:347c%10(Preferred) 
   Autoconfiguration IPv4 Address. . : 169.254.52.124(Preferred) 
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . : 
   DHCPv6 IAID . . . . . . . . . . . : 218111346
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-51-1E-DE-00-1D-72-FA-0A-B9
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled

As shown above DHCP is configured but the laptop is not getting assigned IP address.

As for needing this so much ....everyone loves a challenge and this is mine. Have been working on this a while keeping one eye on this board to see if anyone has figured out how to make this work and the other continuing to
test and experiment.