1. Home
  2. Omega Talk
  3. Problem with USB Stick detection

Problem with USB Stick detection

  • Damien

    Hi,
    I've tried to mount my usb stick following the standard onion tutorial.
    When i plug a stick (i've tried 5 different sticks), i never find the sda1 in the dev folder !

    2 problems:

    • when i plug the power wire on the micro usb plug and connect with ssh wifi access (putty) : when i plug a stick, the wifi put off automatically !!
    • when i plug direct to the computer to access with com3 protocol, when i plug a stick, i don't see a /dev/sda1.

    I have tested all connection on my expansion, USB+, USB-, Ground, +5V pins, all are ok.

    I have reset my omega and reinstall all, nothing.

    With an usb stick, my omega reboot automatically but find nothing...

    In this point, i need any help please šŸ˜ž

    Thank you very much,

    Best regards

    0
  • G

    If you are not seeing /dev/sda1 what other partitions or devices are appearing if any....look for something like sdb, sda5 or similar partitions or devices under /dev.

    0
  • Damien

    Unhappily, nothing new šŸ˜ž

    0
  • G

    While watching the cli via serial connection plug in the usb device and see if it detects it something like this:
    (This what I see when I plug in my USB stick)

    root@Omega-xxxx:(unreachable)/Omega_rudy_dir/php# [86269.320000] usb 1-1.1: new high-speed USB device number 8 using ehci-platform
[86269.440000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[86269.460000] scsi host5: usb-storage 1-1.1:1.0
[86270.890000] scsi 5:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
[86270.900000] sd 5:0:0:0: [sdc] 63901440 512-byte logical blocks: (32.7 GB/30.4 GiB)
[86270.900000] sd 5:0:0:0: [sdc] Write Protect is off
[86270.910000] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[86270.910000] sd 5:0:0:0: [sdc] No Caching mode page found
[86270.920000] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[86270.930000]  sdc: unknown partition table
[86270.940000] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    0
  • Damien

    Nothing happens, USB plug seems to be dead šŸ˜ž but i'm afraid that Omega is the problem because I have tested all pins connections on the expansion dock...
    Is there an opkg package to install or force to reinstall to detect USB device ?

    0
  • G

    BTW what type format did you toss on the USB stick having said I believe and ask others even if it is not ext4 the screen should show some dialog when you plug in the USB stick as mentioned above. And the device or the partition should show up in the /dev/directory.

    1. If you have tried tried each of the following and still no USB stick it's time for the admins.

    firstboot wipes out all of the changes to the filesystem since the last firmware flash.
    (starting over)

    oupgrade -f force an install of the most recent stable firmware.
    each command shown above is like starting over.

    These are things I have tried when I run into a brick-wall.

    0
  • Damien

    I have force the most recent stable firmware installation.

    Each time i plug the USB stick, it displays :

    root@Omega-2561:/dev# [  206.510000] wlan0: authenticate with 24:ec:99:02:98:d7
[  206.530000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  206.540000] wlan0: authenticated
[  206.550000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  206.550000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  206.560000] wlan0: associated

    It seems that it modifies the wlan port !!

    0
  • Chris McCaslin

    @Damien said:

    I have force the most recent stable firmware installation.

    Each time i plug the USB stick, it displays :

    root@Omega-2561:/dev# [  206.510000] wlan0: authenticate with 24:ec:99:02:98:d7
[  206.530000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  206.540000] wlan0: authenticated
[  206.550000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  206.550000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  206.560000] wlan0: associated

    It seems that it modifies the wlan port !!

    Try ls ls /dev/

    0
  • Damien

    When i try ls /dev/ before having pluged the usb stick:

    root@Omega-2561:/# ls /dev/
bus                 mtd1                mtdblock1           pts
console             mtd1ro              mtdblock2           random
cpu_dma_latency     mtd2                mtdblock3           shm
full                mtd2ro              mtdblock4           snd
i2c-0               mtd3                mtdblock5           tty
kmsg                mtd3ro              network_latency     ttyATH0
log                 mtd4                network_throughput  ttyS0
mem                 mtd4ro              null                uinput
memory_bandwidth    mtd5                port                urandom
mtd0                mtd5ro              ppp                 watchdog
mtd0ro              mtdblock0           ptmx                zero

    When i plug the usb stick:

    root@Omega-2561:/# [  177.200000] wlan0: authenticate with 24:ec:99:02:98:d7
[  177.220000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  177.230000] wlan0: authenticated
[  177.240000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  177.240000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  177.250000] wlan0: associated

    and then ls /dev/

    root@Omega-2561:/# ls /dev/
bus                 mtd1                mtdblock1           pts
console             mtd1ro              mtdblock2           random
cpu_dma_latency     mtd2                mtdblock3           shm
full                mtd2ro              mtdblock4           snd
i2c-0               mtd3                mtdblock5           tty
kmsg                mtd3ro              network_latency     ttyATH0
log                 mtd4                network_throughput  ttyS0
mem                 mtd4ro              null                uinput
memory_bandwidth    mtd5                port                urandom
mtd0                mtd5ro              ppp                 watchdog
mtd0ro              mtdblock0           ptmx                zero

    There is no change as i already explained before šŸ˜ž

    0
  • M

    I suggesting you in order to get a good tracking for your system, to use dmesg command from ssh console or serial console.
    The idea is to start your system without your "under the examination" USB stick, then give dmesg to see all system logging. After give dmesg -c to clear all system logging, then connect your USB stick, wait as minute and then dmesg again. Post here the possible output of this last dmesg...

    P.S. if you need to check the many screens dmesg screens please use: dmesg | more
    using this you will get screen pause on each full screen printing, press space bar for the next screen or Q to quit

    0
  • None None

    I had one memory stick refuse to work (the light on the memory stick came on but nothing happened on the Omega) on my Omega. It was an old and bad memory stick so I place the blame on that.
    Using a Kingston branded memory stick worked.

    0
  • Damien

    Thank you for your help.

    USB Stick 1 'Kington' DT101 G2 16GB:

    root@Omega-2561:/# dmesg
[  279.200000] wlan0: authenticate with 24:ec:99:02:98:d7
[  279.220000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  279.230000] wlan0: authenticated
[  279.240000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  279.240000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  279.250000] wlan0: associated

    USB Stick 2 'ScanDisk' Cruzer Switch 16GB:

    root@Omega-2561:/# dmesg
[  509.300000] wlan0: authenticate with 24:ec:99:02:98:d7
[  509.320000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  509.330000] wlan0: authenticated
[  509.340000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  509.350000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  509.350000] wlan0: associated
[  515.810000] wlan0: authenticate with 24:ec:99:02:98:d7
[  515.830000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  515.840000] wlan0: authenticated
[  515.850000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  515.930000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  515.940000] wlan0: associated
[  517.800000] wlan0: authenticate with 24:ec:99:02:98:d7
[  517.820000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  517.830000] wlan0: authenticated
[  517.840000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  517.900000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  517.910000] wlan0: associated
[  538.510000] wlan0: authenticate with 24:ec:99:02:98:d7
[  538.530000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  538.540000] wlan0: authenticated
[  538.550000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  538.670000] wlan0: associate with 24:ec:99:02:98:d7 (try 2/3)
[  538.690000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  538.690000] wlan0: associated
[  561.790000] wlan0: authenticate with 24:ec:99:02:98:d7
[  561.810000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  561.820000] wlan0: authenticated
[  561.830000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  561.920000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  561.930000] wlan0: associated
[  583.800000] wlan0: authenticate with 24:ec:99:02:98:d7
[  583.820000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  583.830000] wlan0: authenticated
[  583.840000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  583.850000] wlan0: RX AssocResp from 24:ec:99:02:98:d7 (capab=0x1411 status=0 aid=2)
[  583.850000] wlan0: associated
[  605.260000] wlan0: authenticate with 24:ec:99:02:98:d7
[  605.280000] wlan0: send auth to 24:ec:99:02:98:d7 (try 1/3)
[  605.380000] wlan0: send auth to 24:ec:99:02:98:d7 (try 2/3)
[  605.440000] wlan0: send auth to 24:ec:99:02:98:d7 (try 3/3)
[  605.490000] wlan0: authenticated
[  605.510000] wlan0: associate with 24:ec:99:02:98:d7 (try 1/3)
[  605.570000] wlan0: associate with 24:ec:99:02:98:d7 (try 2/3)
[  605.610000] wlan0: associate with 24:ec:99:02:98:d7 (try 3/3)
[  605.680000] wlan0: association with 24:ec:99:02:98:d7 timed out

    USB Stick 'Lacie': it reboots the system and after booting, no device found in /dev/ !

    Here is the dmesg result:
    omega.txt

    0 H 1 Reply
  • M

    Sorry to see that all three dmesg are not detected any USB storage device (USB Stick).
    I am not expert but I suspect something wrong with the omega usb connector or the associated hardware function. I can not help further need special tests I suppose.... Sorry

    0
  • L

    Just take one who works, to save you a headache.
    I guess we can't expect that everything works out of the box.

    0
  • G

    You must have a bad board have them replace it.

    0
  • H

    @Damien I checked your omega.txt.
    Your Omega already detected something on boot-time.

    [    6.350000] usb 1-1: new full-speed USB device number 2 using ehci-platform
[    6.570000] usb 1-1: device descriptor read/64, error -71
[    6.890000] usb 1-1: device descriptor read/64, error -71
[    7.300000] usb 1-1: new full-speed USB device number 3 using ehci-platform
[    7.740000] usb 1-1: device descriptor read/64, error -71
[    8.060000] usb 1-1: device descriptor read/64, error -71
[    8.290000] usb 1-1: new full-speed USB device number 4 using ehci-platform
[    8.770000] usb 1-1: device not accepting address 4, error -71
[    8.890000] usb 1-1: new full-speed USB device number 5 using ehci-platform
[    9.370000] usb 1-1: device not accepting address 5, error -71
[    9.370000] usb usb1-port1: unable to enumerate USB device

    Did you connected USB-hub before boot?

    0
  • Damien

    @Hiro-AsO No, i never connected an USB-hub before boot.
    this dmesg is when i connected a lacie usb stick and reboot automatically.
    Here is a standard dsmeg boot, no device in usb port : omega-boot.txt
    Do you think there is an issue about this problem ?

    0
  • M

    @Damien

    I am not expert, but this line in your dmesg file shows something really strange, your omega trying to evaluate an usb device and failed! What is connected to your usb port? I suspect board failure, see the line bellow that is from your dmesg...

    [ 9.340000] usb usb1-port1: unable to enumerate USB device

    I think the best bet is to get official advice from administrators here...

    Sorry I can't help more...

    0
  • Damien

    @Mike-Kranidis Thank you very much for your help, i appreciate it very much šŸ™‚ I think too that my board is failed because there is no usb device connected on the port...

    0 Lazar Demin 1 Reply
  • Lazar Demin
    administrators

    Hi @Damien can you please post a photo of your setup? Just a regular photo of your Omega & Dock and then a photo with the USB stick plugged in.

    0
  • Damien

    Hi @Lazar-Demin
    Here are the photos:
    IMG_1003.jpg
    IMG_1004.jpg
    IMG_1008.jpg
    IMG_1010.jpg

    0 G 1 Reply
usb 99 stick 1
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.