Topics created by Francesco Pessolano

Still available? I'm interested.

@Chris-Stratton Wrong thread

@Chris-Stratton Thank you, you were perfectly right. http://192.168.3.1/setup-wizard worked well. I'm back in the Omega2 game. Thx

no, won't happen

hmmm, seemed to have found this. https://github.com/openwrt/packages/blob/d45c0f1ac01b721fd70c16c1540bc6b39628a4f6/lang/python3/files/python3-package-dev.mk Now I have to figure out how I can just have a base image in the cloud compile include this so that the source can be tested on Onion,Inc's build machines and pushed for testing. That would greatly reduce compile and debug time.

I have four, well the forgot to send me the fifth. Ok, let's say that reboot and connection so far has been worse then the ESP then (which cost less), my pan was to consider onion a replacement for the ESP. However, i see that the o2+ is more picky then other chips on what usb cable is used, so it might be solvable.

@ccs-hello said in Omega2+ hot hot hot: That board is not good enough. MCP1703 linear IC regulator 3.3V output's max output current is 250 mA. Yes, I see now that the MCP1703 is rated to only 250mA. The maker claims his UART supplies up to 400mA at 3.3V. Have one here, I'll run Mark B's wifi load test and get back to you. Might be that this unit is ok for an Omega set-up, but not best for an installation.