Topics created by SpiderKenny

@crispyoz Thanks! That's an idea - I could probably just do a bunch of register level acces to initialise the display over i2c and put up something. I'll need to do a bit of learning on uboot

This issue is resolved in the new beta firmware. More info on that here and here - with more news coming soon!

@SpiderKenny You can use sshpass, here's my rough notes on how to use it to deploy firmware using scp and ssh with sshpass: // using sshpass to deploy new firmware ssh-keygen -f "/home/chris/.ssh/known_hosts" -R "fe80::42a3:6bff:fec3:cb5b%enp0s31f6" sshpass -ponioneer scp -6 -o StrictHostKeyChecking=no ~/source/bin/targets/ramips/mt76x8/openwrt-ramips-mt76x8-omega2p-squashfs-sysupgrade.bin root@[fe80::42a3:6bff:fec3:cb5b%enp0s31f6]:/tmp sshpass -ponioneer ssh -6 -o StrictHostKeyChecking=no root@fe80::42a3:6bff:fec3:cb5b%enp0s31f6 sysupgrade -n /tmp/openwrt-ramips-mt76x8-omega2p-squashfs-sysupgrade.bin fe80::42a3:6bff:fec3:cb5b

@SpiderKenny Yes fastgpio is better but I showed code that uses the file system instead as I'm not sure of your level of experience and this method is easy to implement.

@SpiderKenny did you run scripts/feeds clean? Otherwise try this: git checkout openwrt-18.06 scripts/feeds clean scripts/feeds update -a