Upgrade to OpenWRT 21.02 coming soon?

Schneider

This post is deleted!

Lazar Demin

Wanted to weigh in here:

That's right, we did some experimenting with and testing of OpenWRT 21.02 earlier this year. Hence the openwrt-21.02-dev branch on the OnionIoT/source repo.

There's no plans to make an official release in the near term. As @crispyoz pointed out, there's no official release from OpenWRT yet - we'll see how they fare and adjust accordingly.

That being said, there IS an experimental openwrt-21.02 image available for the Omega2+.
The image can be found here: http://repo.onioniot.com/omega2/images/beta/

It was built using the code in the OnionIoT/source repo openwrt-21.02 branch, following the instructions in the README in the onion directory

We don't recommend using this image for any production environment, just for testing for now.

What currently works

Wifi
- Using the open source mt76 image
Ethernet
USB
SD Card
- May need to install appropriate kmod-fs-* packages
I2C
- Need to install kmod-i2c-mt7628 package
Python3
- Can be installed from the OpenWRT package repo

What does not work or is not included

All Onion packages
- Have not ported any of the Onion OpenWRT packages to 21.02
nodejs
- Not included in the OpenWRT package repos, not yet being built by us

Next Steps

If you end up trying it out, let us know how it goes! We're interested in your feedback and to hear what should be done/added/changed next!

Martin Wiedmeyer

Hello Lazar,

Any update after the post in July?

The current image from Onion is running 18.06 which was EOL a year ago...

According to openwrt.org:
This lists the currently support or not supported OpenWrt versions.

Version --Current status -----Projected EoL
21.02 Fully supported
19.07 Security maintenance March 2022
18.06 End of life ---------- December 2020
17.01 End of life EoL
15.05 End of life EoL

Wallace

This post is deleted!

Wallace

This post is deleted!

Chris Morgan

I’m back working with the omega2s and I’d love to get the upgrade to the latest openwrt done as a part of that work. Is there any timeline on an official update to a newer openwrt?

Regards,
Chris

Moonshiner

oh yes. We are waitinig it too. Our customer needed supported OS.

Pavel Negrobov

Hi, guys. How to enable ethernet and WiFi on this firmware?

root@Omega-3079:~# service network reload
[ 1255.006885] rt3050-esw 10110000.esw: link changed 0x00
root@Omega-3079:~# [ 1259.065375] rt3050-esw 10110000.esw: link changed 0x01

root@Omega-3079:~# /etc/init.d/network reload
[ 1308.682476] rt3050-esw 10110000.esw: link changed 0x00
root@Omega-3079:~# [ 1312.364129] rt3050-esw 10110000.esw: link changed 0x01

root@Omega-3079:~# ifconfig
.....
eth0      Link encap:Ethernet  HWaddr 40:A3:6B:C1:30:7A
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:13104 errors:0 dropped:1 overruns:0 frame:0
          TX packets:413 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1496552 (1.4 MiB)  TX bytes:42273 (41.2 KiB)
          Interrupt:5

root@Omega-3079:~# wifisetup --help
/bin/ash: wifisetup: not found

crispyoz

@Pavel-Negrobov wifisetup command is an Onion tool not available if you are using a standard OpenWrt firmware. You can refer to the OpneWrt documentation for how to configure your network.

https://openwrt.org/docs/guide-user/base-system/basic-networking

Pavel Negrobov

@crispyoz thank you

Prashant Kamdar

@Lazar-Demin any news on OpenWRT 21.02? (polite question)

Lucas Gozalvez

@Lazar-Demin I hope all is good there.

I'm planning to upgrade to 19.07 or 21.02.

Can you please update us about the plans you have for this?

luz

In the meantime, OpenWrt 22.03 is about to get released...

I have largely migrated my own firmware build already, and it works so far. I'm posting here in case anyone is interested in my status quo and/or cooperation to research/iron out the remaining problems.

All in all, the jump from 19.07 went quite smoothly, networking/wifi (mt76 though, not firecore) config just worked as-is.

At this time, I have two issues:

gpio numbering got totally weird as in newer kernels, gpio numbers have become second class citizens, and gpio labels in the device tree are the recommended way to go. Still, /sys/class/gpio exists and works, but the numbers are offset by 416, but also swapped in order such that gpiochip2 ones come first.
[Update: I could track down the reason for this in the kernel sources: drivers could (and still can, but it's deprecated!) set a base number for GPIO banks, or let the kernel automatically assign numbers by setting base to -1. The automatic assignment is in gpiochip_find_base(), and explains the weird outcome: for each GPIO bank registered, it sets base such that the bank gets the highest available GPIO numbers, down from ARCH_NR_GPIOS which is 512 by default. So we get 480..511 for the GPIOs that used to be numbered 0..31, 448..479 for 32..63 (and, only theoretically because not exposed, 416..447 for 64..95).
The Linux kernel guys are quite eager to kill the "old" GPIO numbers, see these comments - "...drop this and assign a poison instead." . So while one could add a patch to set base at it was in older kernels to get the old numbers back, I doubt that would be a good way forward.]
kmod-spi/i2c-gpio-custom no longer exist. The way to go is probably using device tree overlays (like the raspberry folks already do for a long time), but that needs enabling OF_OVERLAY in the kernel and having the dtc device tree compiler available. I'm about to build a fw with this and will start tinkering with dtc and overlays...
[Update2: I got dynamic device tree overlays working, once I found it involves more than just setting OF_OVERLAY. One also needs CONFIGFS_FS and a patchset that was rejected in OpenWrt mainline, which in turn allows loading DT overlays via configfs from userland when OF_CONFIGFS is also set.
[Update: I had no luck yet with OF_OVERLAY, altough I built the kernel with that option set, I did not get the /sys/kernel/config/device-tree/overlays/ node for actually managing DT overlays yet. Any ideas what I'm doing wrong? Apparently there's more to it than just setting OF_OVERLAY]

[Update2: I also made a post in the OpenWrt developer mailing list asking about general status of GPIOs in OpenWrt 22.03, got no feedback yet]