omega2 plus sdcard not working
-
@WereCatf In a reply to myself, I think I'll compile a custom version of LEDE with a fixed DTS later on and see if microSD-slot works then.
-
@WereCatf Cool, let me know if it works please
-
Well, it appears that the issue wasn't what I thought, so I still don't know what is causing this. The microSD-slot works fine with my own, custom build of LEDE with kernel 4.4.39.
-
I am seeing exactly (well, with a different address) the same error. Running Ī©-ware: 0.1.6 b136.
-
I have the Onion Omega2 with the built-in SD card slot. I'm not using ext like the other posters, but FAT, and the card is not recognized at all by the Omega.
I know the card is OK because I can put it in a USB card reader and connect that to the Omega's USB port and it works fine. But somehow the internal card reader is not recognized.
Updated to the latest firmware with oupdate, and still no change.
Thoughts?
-
@WayneL While I could be wrong, my understanding is that the Omega requires the card to be formatted as ext4
-
@Kit-Bishop No, it doesn't. The firmware-image does come with several different filesystem-kmods installed, including fat32 and exFAT.
-
@WayneL It's not anything you are doing wrong, their firmware-image is simply broken. Like I said above, the microSD-card slot works fine with my own custom build. You just have to wait until they release a new image.
-
@WereCatf All good, thanks for update
I was going on my experience with the original Omega with USB storage - that seemed to need ext4
Still awaiting my Omega2+ to try things out - I have received notification it is on its way
-
Baddies released a new firmware-upgrade with kernel version 4.4.39, but the microSD-slot still ain't working.
-
Hello I upgrade the firmware to Repo Firmware Version: 0.1.6 b137.
SD-Card still not working.Error:
[ 283.843931] mmc0: new high speed SDHC card at address aaaa
[ 283.849876] mmcblk: probe of mmc0:aaaa failed with error -28
-
I has installed last firmware 0.1.7 but the sdcard not work.
Why?
Onion support write me not back of my mail..
-
The problem still exists.
-
up at b140 - issue still exists.
-
Well, i just got my Omega 2 +, its on the latest Firmware and it still does not work .__.
-
We're working on it! It's not a trivial fix unfortunately. Please stay tuned, we'll update you guys when the fix is available.
Oh and @WereCatf, you're gonna hurt our feelings! We're working really hard to make the Omega the best it can be! (We'll look into configfs)
-
@Lazar-Demin said in omega2 plus sdcard not working:
We're working on it! It's not a trivial fix unfortunately. Please stay tuned, we'll update you guys when the fix is available.
Oh and @WereCatf, you're gonna hurt our feelings! We're working really hard to make the Omega the best it can be! (We'll look into configfs)
I'm not trying to hurt anyone's feelings, I just don't always control too well what I say. I just wish you would enable the necessary kernel-config options for device-tree overlays, as that wouldn't really increase the kernel's size much, but dt-overlays are a nice, handy way of configuring peripherals on-the-fly. Oh, and please do fix the reset-button in your device-tree -- I mention it in an another thread, but you've configured it as active LOW, whereas it's actually active HIGH, and that's why it's not working. It works fine in my own, custom dt, where I made this change.
-
Hi Lazar ...would you please push the Omega2 patches to github?
And please push the bootloader as well.
-
@Lazar-Demin Perhaps adding a KNOWN ISSUES page before the GETTING STARTED page in the docs would reassure people not to waste time on some Omega2 features as they will be fixed/setup/configured momentarily.
-
@Lazar-Demin said in omega2 plus sdcard not working:
We're working on it! It's not a trivial fix unfortunately. Please stay tuned, we'll update you guys when the fix is available.
If you would be so kind as to push the code...then WE can ALL work on it
