@cskocsis I would first determine which IP it is attempting to listen on as it could be one of 3 addresses. I don't use this app but I suspect you can configure which address it listens on. The issue may be that it is trying to bind on the 0.0.0.0 address (listen on all IP) and is failing on one of the interfaces which may not be the one you want to use.

@Adam-Jimerson OpenWrt uses procd and the source code provides no mechanism for setting a workinf directory. I've used 2 methods to achieve a default directory. Use a script as your init.d command, in that script change to the required working directory before executing the actual binary. These days I added code to my daemon to set a working directory via uci configuration or command line parameter. I prefer option 2 but it takes more work.

@Mitch-Christensen The following references may assist you: https://wiki.openwrt.org/doc/techref/initscripts https://wiki.openwrt.org/doc/techref/process.boot https://wiki.openwrt.org/inbox/procd-init-scripts As a general comment, given that the Omega runs OpenWrt, there is a lot of very useful information that can be found under https://wiki.openwrt.org/doc/start# and https://wiki.openwrt.org/doc/techref/start about running stuff on the Omega

Like Vinicius said, if you have no real reason to use something like C and can get away with python, if it is not crucial to have a fast initialization time, I would go with Python. Also, the difference between python 2 and 3 is minimal. Really 3 is just making things a little more consistent. Mostly if you change your print "ok" to print("ok") that should do it. I would go with python 2. One suggestion. I have found that it is faster to use os.system() for some things rather than their python equivalents. Perhaps you could look into that? Regards, Sam.