@Alberto-Brosich This is a nice article on debugging wifi issues: https://community.onion.io/topic/3306/faq-how-do-i-check-if-i-m-successfully-connected-to-a-wifi-network/5?_=1610027797289 The log should give you more information about what is going on. If you are associated but not getting an IP it may be an issue with your dhcp client, to confirm this set the proto to static and hard code the ip. After restarting the network see if you can ping your network router and 8.8.8.8 (google dns) The results of this will provide more info as to where your issue may lie.

Did you ever figure this out? I think if you just want a server running, install the latest firmware, and you have one running. Connect your omega to a local wifi network, and you have a .local available address on your subnet. I do this as I use an Omega2 as my MQTT server for my local network. I changed my hostname to mosquitto and now through my network via the web console app and I can connect to this server using mosquitto.local from other hosts. It doesn't take a lot of setup. Or, was your question related to something else?

I was having similar issue, then I tried to use omega as a router from below link: https://docs.onion.io/omega2-docs/omega-router.html It is now working fine for me, and ethernet is getting IP by dhcp. But I also need a static ip on ethernet, so if in any case, dhcp is not working, it should be having the static ip. I tried to create one more connection name as 'eth1' with interface as 'wan' as below: config interface 'wan' option ifname 'eth1' option proto 'static' option ipaddr '192.168.0.233' option netmask '255.255.255.0' option ip6assign '60' But it is not working and one more interface 'eth1' is not being created. I tried with using interface as 'lan', it is also not working. Can anybody tell me how it can be done. Again, my requirement is to have a static ip on ethernet, in case dhcp is not working.

Mh, sounds like the same problem. My normal ethernet connections were stable though. The documentation: https://docs.onion.io/omega2-docs/fix-ip-addr-collisions.html says that i need a different subnet for my home network. The omega has 192.168.3.x and i have 192.168.1.x, so thats not the problem. I will try to setup the Omega with mobile internet and disable the hotspot when it's done. Thanks for your reply!