Error when setting up Omega2 Pro [with solution]

Yvan Gagnon

Pardon my ignorance, but where exactly is this file located on the Onion (ie: oupgrade.sh)?

-- Yvan

cas

@Yvan-Gagnon
It's not oupgrade.sh, just oupgrade and it's in located in /usr/bin:

root@Omega-FA93:~# which oupgrade
/usr/bin/oupgrade
root@Omega-FA93:~#

Lazar Demin

To chime in: yes, there was a bug in the oupgrade program in the firmware that was installed during production. This has since been fixed and the fix is included in the latest firmware.

So there's three ways you can upgrade your Omega2 Pro if you are on firmware v0.3.0 b207 or lower

Use the browser-based setup wizard, the steps can be found here
Follow our manual firmware installation guide, just note for step 1, you can find the latest Omega2 Pro firmware here
Make the fix to oupgrade as mentioned above

Once you've installed the latest firmware, oupgrade will work as intended

Yvan Gagnon

I too can confirm that applying the patch works and allows me to upgrade the device. However .. I'm having some issues with the browser based interface -- with the App Manager in particular. I was only able to install the Timelapse Aamera & Power Dock 2 Apps. Attempts to install any other apps Continually fail.

How would I install the apps via the command line?

Legacy Console
Node-Red
Code Editor

-- Yvan

Neil Manuel

I got my Omega2pro on Friday and had the same problem but not checking here first (not been here for a long while) I emailed Lazar who gave me some pointers and I ended up downloading the b211 BIN file from the repository and after copying the BIN file to /tmp used the manual update with file method. I noticed versions b212 and b213 were on the repository but "oupgrade check" was happy that b211 was the latest?

I did hit a massive snag - I was using Firefox on an iMac "connected" to the Onion at 192.168.3.1 and using the busybox terminal program on the Onion itself. Problem was I couldn't type the dash symbol (between the zero and equals keys) - the key worked everywhere else except in busybox. Tried a wired keyboard on the iMac and the dash key still didn't work. Curiously the minus key on the number cluster of my wired keyboard did work allowing me to type the BIN file's name properly.

Anyone else found something as daft as that?

Douglas Kryder

based on what i've read before in other threads the firmware for the omega2 pro can be flashed to the omega2+, is this correct? i also wanted to mention that the links for "images" and "packages" appear to be broken on this page
http://repo.onioniot.com/omega2/packages/onion/images/?prefix=omega2/

the link address for "images" is [on chrome]
http://repo.onioniot.com/omega2/packages/onion/images/images/

and for "packages" is [on chrome]
http://repo.onioniot.com/omega2/packages/onion/images/packages/

Yvan Gagnon

I have to say .. it turned out that I was mistaken about the patch being the solution (for me, anyways). Although it did allow me to run oupgrade and get everything seemingly up to date .. minutes after I posted my reply, my device started behaving erratically, continuously disconnecting from and reconnecting to Wifi, and was mysteriously re-booting itself about every minute or so. I ended up having to do another factory reset and took another shot at re-configuring my Wifi connection and installing apps through the browser interface (which I succeeded at, .. finally). There was no rhyme or reason to it, to be honest.

I think the main problem is that there's never any clear indication that firmware updates, Onion OS updates, or Apps have been properly downloaded or installed, or if/when rebooting the device is necessary. Now that I've finally got the device up and running, I'm reluctant to ever apply any other firmware or Onion OS updates ever again, because it always results in problems. I encountered the exact same issues with my Omega2+.

-- Yvan

Ger Buurman 0

thanks, that did also the trick at my omea, I suggest to also mention the fact that after the upgrade you lose your ssh connection, if used, and have to wait a minute. cheers Ger

crispyoz

I had the same issue with oupgrade, the patch didn't work for me. Instead I just commented out the lines:

#local verbosity="-q"

verbosity="-q"

if [ $bJsonOutput == 0 ]; then

verbosity=""

fi

then removed the reference to $verbosity in the wget command below.

Lazar Demin

Made an official, pinned thread on this:
http://community.onion.io/topic/3470/official-resolution-oupgrade-not-working-on-omega2-pro-factory-firmware

Note that since oupgrade has been fixed, you can install the latest version and then use it to upgrade your firmware:

opkg update
opgk upgrade oupgrade
oupgrade