1. Home
  2. Omega Talk
  3. Cannot install kmod-mii package

Cannot install kmod-mii package

  • J

    opkg --force-depends install kmod-

    0
  • Lnx Prof

    Whenever you get this message it means that the kernel that you're running and the kmod packages in the repository are out of sync.

    My recommendation would be:

    • Upgrade your firmware. The most-recent version appears to be b237 as of 2020-04-07.
    • On reboot, enable the target repository, which would be kmod-mii_4.14.171-1_mipsel_24kc.ipk as of 2020-04-07.

    Then attempt to install the kernel module again.

    0 G 1 Reply
  • G

    @Lnx-Prof I think you did not try your recommendation.

    # Omega2+ FW v0.3.2 b237 2020-04-07

root@Omega-5BE1:~# opkg update
 ...

root@Omega-5BE1:~# opkg install kmod-spi-gpio-custom
Installing kmod-spi-gpio-custom (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio-custom_4.14.81-1_mipsel_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-spi-gpio-custom:
 * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 
 * opkg_install_cmd: Cannot install package kmod-spi-gpio-custom.

    @Jeremy-Shubert This happens very easily when you are using a snapshot image.
    OpenWrt FAQ Cannot satisfy dependencies

    OpenWrt Development builds / snapshots
    Main differences of buildbot snapshots vs. official stable releases

    • snapshots are completely untested.
    0 Lnx Prof 1 Reply
  • Lnx Prof

    @György-Farkas

    If you're attempting to install 4.14.81-1, you don't have the most recent firmware/sources.

    You've also moved to gpio?

    Following my process, I am able to install every kmod in the current target repository.

    0 G 1 Reply
  • G

    @Lnx-Prof 4.14.81 is the kernel version of my official (out of the box) v0.3.2 b237 firmware.
    Do you say that a kmod-spi-gpio-custom (4.14.171-1) kernel (= 4.14.171 ...) module is OK for this kernel?

    # Omega2+ FW v0.3.2 b237 2020-04-07

root@Omega-5BE1:/# cat /etc/opkg/distfeeds.conf
src/gz openwrt_core http://downloads.openwrt.org/releases/18.06-SNAPSHOT/targets/ramips/mt76x8/packages
#src/gz openwrt_base http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/base
#src/gz openwrt_luci http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/luci
#src/gz openwrt_onion http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/onion
#src/gz openwrt_packages http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/packages
#src/gz openwrt_routing http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/routing
#src/gz openwrt_telephony http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/telephony
src/gz omega2_core http://repo.onioniot.com/omega2/packages/core
src/gz omega2_base http://repo.onioniot.com/omega2/packages/base
src/gz omega2_packages http://repo.onioniot.com/omega2/packages/packages
src/gz omega2_routing http://repo.onioniot.com/omega2/packages/routing
src/gz omega2_onion http://repo.onioniot.com/omega2/packages/onion

root@Omega-5BE1:~# opkg update
 ...

root@Omega-5BE1:/# opkg install kmod-spi-gpio-custom
Installing kmod-spi-gpio-custom (4.14.171-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06-SNAPSHOT/targets/ramips/mt76x8/packages/kmod-spi-gpio-custom_4.14.171-1_mipsel_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-spi-gpio-custom:
 * 	kernel (= 4.14.171-1-da4f999cff891c50c6d11774cc24f4e2) * 	kernel (= 4.14.171-1-da4f999cff891c50c6d11774cc24f4e2) * 	kernel (= 4.14.171-1-da4f999cff891c50c6d11774cc24f4e2) * 
 * opkg_install_cmd: Cannot install package kmod-spi-gpio-custom.

    What is your kernel version please?

    0
  • Lnx Prof

    I'm sorry that you're having issues with loading the kernel modules. It's a commonly-hit wall.

    If you're using 4.14.81, you'll need kmod-spi-bitbang, kmod-spi-gpio and kmod-spi-gpio-custom.

    mazer@snowball:~# ssh root@192.168.3.1
root@192.168.3.1's password: 


BusyBox v1.28.3 () built-in shell (ash)

   ____       _             ____
  / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
 / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
 \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
 W H A T  W I L L  Y O U  I N V E N T ?  /___/
 -----------------------------------------------------
   Ω-ware: 0.3.2 b237
 -----------------------------------------------------
root@Omega-73D6:~# uname -r
4.14.81
root@Omega-73D6:~# lsmod | grep spi
regmap_spi              1274  0 
spi_bitbang             2661  1 spi_gpio
spi_gpio                5424  0 
spidev                  6336  0 
root@Omega-73D6:~# opkg list-installed | grep spi
kmod-spi-bitbang - 4.14.81-1
kmod-spi-dev - 4.14.81-1
kmod-spi-gpio - 4.14.81-1
kmod-spi-gpio-custom - 4.14.81-1
spi-tools - 1-cc6a41fdcec60610703ba6db488c621c64952898

    Edit: added the package versions

    0 G 1 Reply
  • G

    @Lnx-Prof Many thanks for your sympathy empathy. 🙂

    # Omega2+, FW v0.3.2 237 (out of the box)

root@Omega-5BE1:~# opkg update
 ...
root@Omega-5BE1:/# opkg list-installed | grep ^kernel
kernel - 4.14.81-1-10b6683764d58480e54ef73aa783b9bb             # installed kernel 4.14.81-1-10b6683764d58480e54ef73aa783b9bb

root@Omega-5BE1:/# opkg depends -A kmod-spi-gpio-custom
kmod-spi-gpio-custom depends on:
	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b)   # required kernel  4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b
	kmod-spi-bitbang
	kmod-spi-gpio
	kmod-spi-dev

root@Omega-5BE1:~# opkg install kmod-spi-gpio-custom
Installing kmod-spi-gpio-custom (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio-custom_4.14.81-1_mipsel_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-spi-gpio-custom:
 * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 
 * opkg_install_cmd: Cannot install package kmod-spi-gpio-custom.

root@Omega-5BE1:~# opkg --force-depends install kmod-spi-gpio-custom
Installing kmod-spi-gpio-custom (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio-custom_4.14.81-1_mipsel_24kc.ipk
Installing kmod-spi-bitbang (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-bitbang_4.14.81-1_mipsel_24kc.ipk
Installing kmod-spi-gpio (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio_4.14.81-1_mipsel_24kc.ipk
Configuring kmod-spi-bitbang.
Configuring kmod-spi-gpio.
[  637.305666] kmodloader: loading kernel modules from /etc/modules.d/*
[  637.328374] kmodloader: done loading kernel modules from /etc/modules.d/*
Configuring kmod-spi-gpio-custom.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-spi-gpio-custom:
 * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) * 	kernel (= 4.14.81-1-4d99ecc9745adb4d8a275d8e3a38961b) *

    Do you say hereupon each spi related stuff is installed correctly and fully usable - independently of the snapshot's kernel mismatch?

    0
  • G

    @Jeremy-Shubert Unfortunately I can not reproduce your previous solution.
    You wrote in OpenWRT opkg Packages error on 30 Aug 2019, 00:59

    i downloaded an older firmware to my Omega...0.3.2 b230 and this was resolved. The build number of the kernel in this firmware matches what was available

    Is/was the 0.3.2 b230 version number correct?

    0
  • Lazar Demin
    administrators

    We looked into this. The kernel mismatches were due to how our continuous deployment build system used to work.

    It's now been fixed! If you're on the latest release you'll be able to install all kernel modules

    Tested on my end and everything worked fine:

    root@Omega-F195:/# opkg install kmod-spi-gpio-custom
Installing kmod-spi-gpio-custom (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio-custom_4.14.81-1_mipsel_24kc.ipk
Installing kmod-spi-bitbang (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-bitbang_4.14.81-1_mipsel_24kc.ipk
Installing kmod-spi-gpio (4.14.81-1) to root...
Downloading http://repo.onioniot.com/omega2/packages/core/kmod-spi-gpio_4.14.81-1_mipsel_24kc.ipk
Configuring kmod-spi-bitbang.
Configuring kmod-spi-gpio.
[ 2461.589814] kmodloader: loading kernel modules from /etc/modules.d/*
[ 2461.608685] kmodloader: done loading kernel modules from /etc/modules.d/*
Configuring kmod-spi-gpio-custom.
root@Omega-F195:/# uci show onion
onion.@onion[0]=onion
onion.@onion[0].version='0.3.2'
onion.@onion[0].build='239'
...
    1 G TypeSeven 2 Replies
  • G

    @Lazar-Demin
    Replying "Cannot install kmod-spi-gpio-custom package"

    # Omega2+, FW upgrade from v0.3.2 237 to v0.3.2 239

root@Omega-5BE1:~# oupgrade -l -f
 ...
root@Omega-5BE1:~# opkg update
 ...

root@Omega-5BE1:~# opkg list-installed | grep ^kernel
kernel - 4.14.81-1-10b6683764d58480e54ef73aa783b9bb
root@Omega-5BE1:~# opkg depends -A kmod-spi-gpio-custom
kmod-spi-gpio-custom depends on:
	kernel (= 4.14.81-1-10b6683764d58480e54ef73aa783b9bb)
	kmod-spi-bitbang
	kmod-spi-gpio
	kmod-spi-dev

root@Omega-5BE1:~# opkg install kmod-spi-gpio-custom
 ...

    OK Thank you (on behalf of the other guys too) 🙂

    3
  • A
    Banned

    Like the kernel itself, modules can take parameters that customize their behavior, though the default parameters work well in most cases. User-space tools can list the modules currently loaded into a running kernel; query all available modules for available parameters and module-specific information.

    0
  • TypeSeven

    @Lazar-Demin
    Curious. I run v0.3.3 b250 on Omega2Spro yet I'm unable to install a few packages; firstly, when only Onion package repo is in use; secondly, when the OpenWRT larger repo is uncommented in /etc/opkg/distfeeds.conf

    I'm unable to install kmod-usb-net-cdc-mbim and few others because of the error below.

    root@Cortex-2004:~# opkg install kmod-usb-serial-option
Installing kmod-usb-serial-option (4.14.206-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06-SNAPSHOT/targets/ramips/mt76x8/packages/kmod-usb-serial-option_4.14.206-1_mipsel_24kc.ipk
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-serial-option:
 * 	kernel (= 4.14.206-1-da4f999cff891c50c6d11774cc24f4e2) * 
 * opkg_install_cmd: Cannot install package kmod-usb-serial-option.
root@Cortex-2004:~# uname -r
4.14.81
root@Cortex-2004:~#
    0
  • C

    @TypeSeven It's always better to start a new thread instead of a necroposting.

    kmod-usb-serial-option is part of a standard Omega firmware, I checked the latest 0.3.2 b232.

    If you have the build system installed you can build kmod-usb-net-cdc-mbim and then load the package, the version you are download from OpenWrt repos has been built with a kernel version dependency.

    1
omega2s+ 96 lte install 3
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.