Omega 2S+: No WiFi Support with OpenWRT 21.02
-
@IBH I believe @crispyoz is saying if you select the Omega2+ target profile, it will automatically select the open-source mt76 wifi driver
-
@Lazar-Demin the Omega2+ target profile is selected , it doesn't select the open-source mt76 wifi driver. I cannot see any wifi driver which has been selected. Do you know the exact name of the wifi driver please?
CONFIG_TARGET_ramips_mt76x8_DEVICE_onion_omega2p=y
CONFIG_TARGET_PROFILE="DEVICE_onion_omega2p"
-
@IBH it should be called
mt76orkmod-mt76
You can find the package makefile here: https://github.com/openwrt/openwrt/blob/openwrt-21.02/package/kernel/mt76/Makefile
-
@IBH By following my initial instructions the build will include kmod-mt76-core as you can see from the extract of the .config file here:
CONFIG_TARGET_ramips_mt76x8=y CONFIG_TARGET_ramips_mt76x8_DEVICE_onion_omega2p=y CONFIG_TARGET_SUBTARGET="mt76x8" CONFIG_DEFAULT_kmod-mt7603=y CONFIG_DEFAULT_kmod-sdhci-mt7620=y CONFIG_PACKAGE_kmod-sdhci-mt7620=y CONFIG_PACKAGE_kmod-mt76-core=y CONFIG_PACKAGE_kmod-mt7603=y
-
@crispyoz Thank you so much , I did the same you have done for enabling the module and i have applied the settings as they are posted on the forum but it doesn't work.
root@OpenWrt:/# /etc/init.d/network restartradio0(mac80211): Interface type not supported
[407913.630263] br-lan: port 1(eth0) entered disabled state
[407913.645038] device eth0 left promiscuous mode
[407913.649736] br-lan: port 1(eth0) entered disabled state
root@OpenWrt:/# [407916.196957] br-lan: port 1(eth0) entered blocking state
[407916.202418] br-lan: port 1(eth0) entered disabled state
[407916.208209] device eth0 entered promiscuous mode
[407916.238873] br-lan: port 1(eth0) entered blocking state
[407916.244341] br-lan: port 1(eth0) entered forwarding state
[407917.200558] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Do you have any idea please?
-
@IBH Vanilla OpenWRT isn't configured for easy networking right out of the box, you'll have to make network, firewall, and wireless configuration changes.
Take a look at our UCI-defaults network configuration script for an idea of what we do:
For an idea of how we configure the beta OpenWRT 22.03 firmware, take a look at UCI-defaults network configuration script:https://github.com/OnionIoT/OpenWRT-Packages/blob/openwrt-22.03/omega2-base/files/etc/uci-defaults/15_networkAlternatively, you can use our beta OpenWRT 22.03 firmware. It supports wifi networking right out of the box. More info in this thread: https://community.onion.io/topic/4963/beta-openwrt-22-03-firmware-available-your-feedback-is-needed
EDIT: specified UCI defaults are for OpenWRT 22.03
-
@Lazar-Demin Hi Lazar, I'm using the OpenWRT 21.02 release and not the onion openwrt. I did the configuration shared by @crispyoz in the forum :
https://community.onion.io/topic/4940/original-image-openwrt-22-03-3-ramips/2?_=1680610145788
And I got an issue related to the interface radio0 doesn't exist. Maybe I missed something and for this reason I would like to check with you both.
-
@IBH Ah my mistake, I didn't specify the uci defaults configuration is for our new beta firmware that's based on OpenWRT 22.03. This should apply to your situation since this firmware also uses the mt76 wifi driver.
-
@IBH Here is my OpenWrt 21 config:
root@OpenWrt:/etc/config# cat network config interface 'loopback' option device 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd25:0766:cc06::/48' config switch option name 'switch0' option reset '1' option enable_vlan '0' config interface 'wwan' option proto 'dhcp' option device 'apcli0' config interface 'wlan' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' option type 'bridge'cat wireless config wifi-device 'radio0' option type 'mac80211' option path 'platform/10300000.wmac' option channel '11' option band '2g' option htmode 'HT20' option disabled '0' config wifi-iface 'default_radio0' option device 'radio0' option network 'wlan' option mode 'ap' option ssid 'OpenWrt' option encryption 'none' config wifi-iface 'sta' option device 'radio0' option mode 'sta' option network 'wwan' option ifname 'apcli0' option ssid 'MYSSID' option encryption 'psk2' option key '*********************************'
-
@crispyoz Thank you , I did a ' wifi up' but the status says it is not up. Any help please ? How do you run those configs ?
root@OpenWrt:/# wifi status
{
"radio0": {
"up": false,
"pending": true,
"autostart": true,
"disabled": false,
"retry_setup_failed": false,
"config": {
"path": "platform/10300000.wmac",
"channel": "11",
"band": "2g",
"htmode": "HT20",
"disabled": false
},
"interfaces": [
{
"section": "default_radio0",
"config": {
"mode": "ap",
"ssid": "OpenWrt",
"encryption": "none",
"network": [
"wlan"
],
"mode": "ap"
},
"vlans": [],
"stations": []
},
{
"section": "sta",
"config": {
"mode": "sta",
"ifname": "apcli0",
"ssid": "MYSSID",
"encryption": "psk2",
"key": "*********************************",
"mode": "sta",
"network": [
"wwan"
]
},
"vlans": [],
"stations": []
}
]
}
}
-
@IBH Your configuration is using my dummy wifi ssid and key so that isn't going to work on your wifi. You need to update the configuration to utilise your wifi.
"ssid": "MYSSID", "encryption": "psk2", "key": "*********************************",To search for available wifi, use this command iw dev apcli0 scan | grep -i ssid
To update the ssid and key you can either edit the file /etc/config/wireless or use these commands:
uci set wireless.sta.ssid='<ENTER YOUR SSID HERE>'
uci set wireless.sta.key='<ENTER YOUR WIFI PASSWORD HERE>'
uci commit wireless
service network restart
-
@crispyoz
I got this:
root@OpenWrt:/# iw dev apcli0 scan | grep -i ssid
command failed: No such device (-19)
Do I miss something?
I do not need it to connect to a network. I need it to provide one.
When I did wifi up the radio0 doesn't be up and I cannot see the ssid on my phone.
-
@crispyoz this is the output of lsmod:
root@OpenWrt:/# lsmod
cfg80211 286959 3 mt7603e,mt76,mac80211
compat 1346 2 mac80211,cfg80211
crc_ccitt 1774 0
gpio_button_hotplug 7058 0
ip_tables 10275 2 iptable_mangle,iptable_filter
ip6_tables 10087 2 ip6table_mangle,ip6table_filter
ip6t_REJECT 1298 0
ip6table_filter 754 0
ip6table_mangle 1234 0
ipt_REJECT 1234 0
iptable_filter 722 0
iptable_mangle 978 0
leds_gpio 3058 0
mac80211 534529 2 mt7603e,mt76
mmc_block 27130 0
mmc_core 91816 2 mmc_block,mtk_sd
mt76 40830 1 mt7603e
mt7603e 39804 0
mtk_sd 15170 0
nf_log_common 3000 2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4 3602 0
nf_log_ipv6 4274 0
nf_reject_ipv4 2313 1 ipt_REJECT
nf_reject_ipv6 2670 1 ip6t_REJECT
nls_base 5354 1 usbcore
ohci_hcd 24424 1 ohci_platform
ohci_platform 3442 0
usb_common 3134 2 ohci_hcd,usbcore
usbcore 144625 2 ohci_platform,ohci_hcd
x_tables 16295 17 ipt_REJECT,xt_time,xt_tcpudp,xt_multiport,xt_mark,xt_mac,xt_limit,xt_comment,xt_TCPMSS,xt_LOG,iptable_mangle,iptable_filter,ip_tables,ip6table_mangle,ip6table_filter,ip6_tables,ip6t_REJECT
xt_LOG 818 0
xt_TCPMSS 3218 0
xt_comment 562 0
xt_limit 1394 0
xt_mac 690 0
xt_mark 722 0
xt_multiport 1362 0
xt_tcpudp 1874 0
xt_time 1970 0
-
@crispyoz
root@OpenWrt:/# iw list
Wiphy phy0
wiphy index: 0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports AP-side u-APSD.
Device supports T-DLS.
Available Antennas: TX 0x1 RX 0x1
Configured Antennas: TX 0x1 RX 0x1
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
* P2P-client
* P2P-GO
Band 1:
Capabilities: 0x17e
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: No restriction (0x00)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 2412 MHz [1] (14.0 dBm)
* 2417 MHz [2] (14.0 dBm)
* 2422 MHz [3] (14.0 dBm)
* 2427 MHz [4] (14.0 dBm)
* 2432 MHz [5] (14.0 dBm)
* 2437 MHz [6] (14.0 dBm)
* 2442 MHz [7] (14.0 dBm)
* 2447 MHz [8] (14.0 dBm)
* 2452 MHz [9] (14.0 dBm)
* 2457 MHz [10] (14.0 dBm)
* 2462 MHz [11] (14.0 dBm)
* 2467 MHz [12] (14.0 dBm) (no IR)
* 2472 MHz [13] (14.0 dBm) (no IR)
* 2484 MHz [14] (14.0 dBm) (no IR)
valid interface combinations:
* #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 4,
total <= 4, #channels <= 1, STA/AP BI must match
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Supported extended features:
* [ RRM ]: RRM
* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
* [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
* [ AQL ]: Airtime Queue Limits (AQL)
* [ SCAN_RANDOM_SN ]: use random sequence numbers in scans
* [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans
* [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
* [ DEL_IBSS_STA ]: deletion of IBSS station support
* [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
* [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
-
@crispyoz root@OpenWrt:/# iw dev
phy#0
Interface wlan0
ifindex 5
wdev 0x2
addr 40:a3:6b:c3:17:1f
type AP
txpower 14.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 0 0 0 0 0 0 0
-
@IBH Strange, everything looks correct to me, but iw status does not show the SSID. After you made changes to the wireless file, try rebootig and wait for a minute before running wifi status. Also try making these changes:
uci set wireless.radio0.channel='auto'
uci set wireless.sta.disabled='1'
uci commit wirelessThen reboot.
-
@crispyoz I've tried that too but still no luck
-
@IBH Maybe try using the 21.02 firmware released by OpenWRT: onion_omega2p-squashfs-sysupgrade.bin at https://downloads.openwrt.org/releases/21.02.5/targets/ramips/mt76x8/
If the wifi works using that firmware, then it points to an issue with the customized firmware you've built.
-
@IBH I put my firmware binary on my github, you just need to add the wifi configuration I posted earlier. If that works for you I can share my build config. If the Onin version works for you as provided by @Lazar-Demin go with that one as mine is based up on the standard OpenWrt build.
-
@crispyoz Thank you , we are using same as you an Openwrt build and we don't use onion-openwrt . Will check with your firmware binary and @Lazar-Demin's firmware too. In fact, it is strange that we have the wlan interface and everything looks good but we couldn't see the SSID and have the connection.
