@JP-Norair Tell us more details about your issues please:
Newer builds (than Omega 2+ b202 fw binary) simply don't work with UART over ttyS0
???
Onion Omega images (Software Repos) on 2020-01-24:
Omega the "original"
http://repo.onion.io/omega/images/
Omega2 up to v0.2.2-b202
http://repo.onion.io.s3.amazonaws.com/omega2/images/index.html?prefix=omega2/images/
newer than Omega2 v0.2.2-b202
http://repo.onioniot.com/omega2/images/
@Chris-Morgan said in Is there a BT/BLE chip level option suggested for the Omega2+ or the Omega2S+?:
s for mechanical and cost savings. Something t
Hey Chris,
You could purchase a nRF52832 module. Then flash it with this firmware:
https://github.com/theBASTI0N/nrf52832_scanner
I then created an application that will receive the BLE data over UART. It then decodes the data and sends it over MQTT.
https://github.com/theBASTI0N/ble2mqtt
Making your onion I nice BLE gateway. Also the aplication will work with Bluez compatable devices.
To enable netconsole logging, you will specify the interface used to reach the syslog server, the IP and port of the syslog server, and optionally the MAC address of that server www.mcdvoice.com thank you
I will attempt to upgrade my image and pip install it. Pip install failed last time I tried. If you are interested in my use case, or have done something similar, here the talk : https://www.youtube.com/watch?v=mxyziRuSefI . Please let me know if there is something I have missed, hopefully I will have a working solution with the Onion as the high level processor soon.
@Peter-Carr I aggree, with some common sense I was able do it, but I would urgently ask the Onion team to update their documentation. Obviously there are some differences in newer firmware versions like b233
I added a 1 GB SD-card. it was already formatted and automatically mounted. So I only had to start the slightly modified tar command and then I had to modify /etc/config/fstab file
(But before that it took me hours and several firmware resets)
I am a member of this project. Last week I was asked to fork a repo from the project. I tried but received a permission error. The person who manages this Azure DevOps project made some changes and now I cannot see the repo at all. Could you please take a look what can be the problem krogerfeedback.com survey
@William-Jones yes I have 3 or 4 on WEP (reluctantly) all on one site and router. I would suggest you try another router, WEP is inherently insecure so I don't think anyone is going to fix an issue related to WEP.
Thanks. I'd seen that before, ran into bigger problems with the pigpio build (eg no ldconfig available for the omega). That said, I found a method to use with the smbus2 package that allowed me what I needed.
Looks like your connection to Community was lost, please wait while we try to reconnect.
